2. Apply polishing foam
Place a small amount of polishing foam on the microfiber cloth rather than directly on the bodywork. This amount can be used to work an area approximately the size of an A4 sheet. It is better to start with a small quantity and add more if necessary than to apply too much product at once.
3. Rub in circular motions
Start polishing the scratched area using smooth, steady circular motions and moderate pressure. Excessive force is unnecessary. The polishing compound is designed to work gradually on the surface of the clear coat and may reduce the visibility of shallow marks. Continue the movement for about one or two minutes per section, while avoiding excessive friction or heat buildup.
4. Remove the excess
Once the area has been worked, take the second microfiber cloth, ensuring that it is clean and dry, and gently remove any remaining polish residue. At this point, you can assess whether the scratch has become less visible. The result will depend largely on the depth and severity of the mark.
5. Review and repeat if necessary
If the scratch is still noticeable, you may repeat the process once or twice, provided the product instructions allow it. More pronounced surface marks may require several passes. Avoid repeatedly polishing the exact same area, since excessive polishing can gradually reduce the thickness of the clear coat.
There are also a few simple precautions that can make the difference between a cleaner finish and unnecessary paint damage.
Additional tips for a better result
Work in the shade: Avoid performing the procedure under direct sunlight, as heat can cause the product to dry too quickly and make it more difficult to work evenly.
Use clean cloths: Never reuse a dirty cloth or one that has been in contact with the floor. Particles trapped in the fabric can scratch the paint.
Apply wax at the end: Once the polishing is complete, you can apply a suitable protective wax according to the product instructions. This can help protect the finish and restore some of its shine.
Do not apply excessive pressure: More pressure does not necessarily produce a better result. Controlled movements and the correct product are more important than force.
